2026 Connecticut DMV Permit Test 23 (21 Questions And Complete Answers)
1 / 21
Terms in this set
21
If you drive too fast on a wet road, there is a danger that:
1. Your tires will start to glide over the water.
2. Your ability to judge speed and control will be impaired.
3. Your own spray will obscure the vision of other drivers.
1. Your tires will start to glide over the water.
2. Your ability to judge speed and control will be impaired.
3. Your own spray will obscure the vision of other drivers.
Your tires will start to glide over the water.
A pedestrian starts to cross the street after the "Don't Walk" signal begins to flash. The pedestrian is in the middle of the street when your signal light changes to green. You should:
1. Proceed if you have the right-of-way.
2. Proceed if the pedestrian is not in your lane.
3. Wait until the pedestrian crosses the street before proceeding.
1. Proceed if you have the right-of-way.
2. Proceed if the pedestrian is not in your lane.
3. Wait until the pedestrian crosses the street before proceeding.
Wait until the pedestrian crosses the street before proceeding.
A flashing yellow light at an intersection means you should:'
1. Slow down and proceed with caution.
2. Come to a complete stop as quickly as possible.
3. Stop and proceed only when the intersection is clear.
1. Slow down and proceed with caution.
2. Come to a complete stop as quickly as possible.
3. Stop and proceed only when the intersection is clear.
Slow down and proceed with caution.
When driving in fog, you should:
1. Use your high beam headlights.
2. Use your parking lights.
3. Use your low beam headlights.
1. Use your high beam headlights.
2. Use your parking lights.
3. Use your low beam headlights.
Use your low beam headlights.
If you are about to be hit from the rear, you should not:'
1. Release your seat belt.
2. Brace yourself.
3. Press your head against the head restraint.
1. Release your seat belt.
2. Brace yourself.
3. Press your head against the head restraint.
Release your seat belt.
When approaching an intersection controlled by a flashing yellow light, you must:'
1. Come to a complete stop at the intersection.
2. Maintain your normal speed.
3. Slow down and proceed with caution.
1. Come to a complete stop at the intersection.
2. Maintain your normal speed.
3. Slow down and proceed with caution.
Slow down and proceed with caution.
Where is it safe to pass another vehicle?
1. Within an intersection where there are no oncoming vehicles
2. Wherever signs and/or pavement markings permit passing
3. Within a curve where there are no oncoming vehicles
1. Within an intersection where there are no oncoming vehicles
2. Wherever signs and/or pavement markings permit passing
3. Within a curve where there are no oncoming vehicles
Wherever signs and/or pavement markings permit passing
If it feels like your tires have lost contact with the surface of the road, you should:
1. Slow down by shifting into a lower gear.
2. Ease your foot off the gas pedal.
3. Slow down by pumping the brakes quickly and firmly.
1. Slow down by shifting into a lower gear.
2. Ease your foot off the gas pedal.
3. Slow down by pumping the brakes quickly and firmly.
Ease your foot off the gas pedal.
What is an important step in turning?'
1. Check traffic in all directions.
2. Increase your speed.
3. Always move to the left lane.
1. Check traffic in all directions.
2. Increase your speed.
3. Always move to the left lane.
Check traffic in all directions.
Broken yellow lines are used on streets and highways to:
1. Indicate no passing zones.
2. Separate lanes of traffic moving in the same direction.
3. Separate lanes of traffic moving in opposite directions.
1. Indicate no passing zones.
2. Separate lanes of traffic moving in the same direction.
3. Separate lanes of traffic moving in opposite directions.
Separate lanes of traffic moving in opposite directions.
Showing the first 10 terms. Use the flashcard player above to study all 21 terms!