2026 Connecticut DMV Knowledge Test Class B Test 1 (50 Questions And Complete Answers)

DMV 50 Terms | 2026 Connecticut DMV Knowledge Test Class B Test 1 (50 Questions And Complete Answers)
1 / 50
Terms in this set 50
A driver can rely on front wheel braking to work:

1. On dry roadways only.
2. Under all conditions.
3. Under all conditions, except for snow.
Under all conditions.
To check the automatic transmission fluid level in some vehicles, you will have to:

1. Park your vehicle uphill.
2. Park your vehicle downhill.
3. Leave the vehicle running.
Leave the vehicle running.
If an applicant does not receive an air brakes endorsement:

1. They cannot operate a vehicle with air brakes.
2. They can only operate a vehicle with air brakes in intrastate commerce.
3. They can only operate a vehicle with air brakes in interstate commerce.
They cannot operate a vehicle with air brakes.
Air storage tanks:

1. Are not allowed on a vehicle.
2. Hold compressed air for the brakes.
3. Should be drained of excess air after every trip.
Hold compressed air for the brakes.
If a driver begins to feel fatigued while driving, they should:

1. Continue driving.
2. Drink coffee.
3. Stop and rest.
4. Drive faster to finish the trip more quickly.
Stop and rest.
An encroachment is when:

1. A driver does not appear for their scheduled basic skills test.
2. A vehicle touches an exercise boundary line during the basic skills test.
3. A driver fails one section of the basic skills test.
A vehicle touches an exercise boundary line during the basic skills test.
When driving in fog, you should:

1. Use the windshield wipers.
2. Use the low beam headlights.
3. Use the high beam headlights.
4. Use the heater.
Use the low beam headlights.
Friction in an S-cam brake is caused when the brake shoes and linings:

1. Press against the outside of the brake drum.
2. Press against the inside of the brake drum.
3. Push against each other.
Press against the inside of the brake drum.
Black ice is:

1. Usually thick.
2. Usually thin.
3. Not a hazard when driving.
Usually thin.
Brake pads should:

1. Be covered with grease.
2. Be covered with oil.
3. Be covered with brake fluid.
4. Not have any oil or grease on them.
Not have any oil or grease on them.

Showing the first 10 terms. Use the flashcard player above to study all 50 terms!