2026 Connecticut DMV Bus Endorsement Test 1 (20 Questions And Complete Answers)

DMV 20 Terms | 2026 Connecticut DMV Bus Endorsement Test 1 (20 Questions And Complete Answers)
1 / 20
Terms in this set 20
If approaching a railroad crossing while driving a placarded vehicle, you should always:

1. Activate your four-way flashers.
2. Stop within five feet of the tracks.
3. Change gears while on the tracks.
4. Change lanes while on the tracks.
Activate your four-way flashers.
When driving a school bus, mirrors should be adjusted:

1. During the drive.
2. Before beginning to drive.
3. By the students.
Before beginning to drive.
During a vehicle inspection, ensure that lug nuts are all of the following, except:

1. Free of cracks.
2. Free of distortions.
3. Loose.
4. Free of rust.
Loose.
When inspecting engine compartment belts during the vehicle inspection test:

1. The belts should be checked for snugness, each with up to three inches of play.
2. The water pump belt does not need to be identified.
3. The air compressor belt should be removed.
4. The applicant must identify which items are not belt-driven, if any.
The applicant must identify which items are not belt-driven, if any.
During the on-road driving test, you must do all of the following, except:

1. Wear your safety belt.
2. Obey all traffic laws.
3. Complete the test without a moving violation.
4. Obey all traffic signs and signals, but only if other traffic is present.
Obey all traffic signs and signals, but only if other traffic is present.
If you must drive in reverse at a student pick-up point, you should:

1. Back up before the students board the bus.
2. Back up after the students board the bus.
3. Back up while students direct you.
Back up after the students board the bus.
When students are being picked up by a school bus:

1. The students should wait at a designated bus stop.
2. The driver should pick up students whether or not they are at the designated bus stop.
3. The parents should choose where the bus stop will be located.
The students should wait at a designated bus stop.
When taking the basic control skills test, drivers are:

1. Not permitted to stop and exit the vehicle to look at the vehicle’s position.
2. Encouraged not to exit the vehicle to look at the vehicle’s position.
3. Allowed to leave the vehicle, but only if the vehicle is placed in reverse.
4. Allowed to leave the vehicle, but only if the vehicle is placed in neutral and the parking brake is set.
Allowed to leave the vehicle, but only if the vehicle is placed in neutral and the parking brake is set.
During a basic vehicle control skills test, you may be asked to:

1. Swerve to avoid a hazard.
2. Parallel park.
3. Drive straight into a parking space.
Parallel park.
During a basic vehicle control skills test, you may be asked to:

1. Alley dock.
2. Parallel park to your right.
3. Parallel park to your left.
4. All of the above.
All of the above.

Showing the first 10 terms. Use the flashcard player above to study all 20 terms!