2026 Arizona DMV Permit Test 17 (25 Questions And Complete Answers)
DMV25 Terms|2026 Arizona DMV Permit Test 17 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
A steady green traffic light at an intersection means:
1. Increase your speed.
2. Adjust your mirrors.
3. You may continue through the intersection at a safe and reasonable speed, if it is clear to do so.
You may continue through the intersection at a safe and reasonable speed, if it is clear to do so.
You have allowed the wheels of your vehicle to run off the edge of the pavement. What should you do first?
1. Turn the front wheels slightly to the left to edge the car back onto the pavement.
2. Hold the steering wheel firmly, release the gas pedal, and gently apply the brakes.
3. Apply the brakes and turn the front wheels sharply to the left.
Hold the steering wheel firmly, release the gas pedal, and gently apply the brakes.
Excessive speed:
1. Does not increase the chance of a crash.
2. Increases your ability to react to a hazard.
3. Often leads to high-risk decision-making.
Often leads to high-risk decision-making.
When preparing to make a left turn from a two-way street, you should drive:
1. Near the right-hand side of the road.
2. Near the centerline.
3. On the left of the centerline.
Near the centerline.
When entering a roadway from an alley:
1. Stop at the sidewalk.
2. Honk your horn.
3. The speed limit is 15 mph.
Stop at the sidewalk.
When driving at night on a dimly lit street, you should:
1. Drive slowly enough that you can stop within the area illuminated by your headlights.
2. Turn on your high beam headlights to better see the vehicles ahead of you.
3. Keep the instrument panel lights bright to be more visible to other drivers.
Drive slowly enough that you can stop within the area illuminated by your headlights.
If it feels like your tires have lost contact with the surface of the road, you should:
1. Slow down by shifting into a lower gear.
2. Ease your foot off the gas pedal.
3. Slow down by pumping the brakes quickly and firmly.
When may you legally drive around or under a railroad crossing gate?
1. Never.
2. When you can see clearly in both directions.
3. When the warning lights are not flashing.
Never.
What should a driver do when approaching a traffic control signal that is not in operation?
1. Come to a full stop and yield the right-of-way before entering the intersection.
2. If the intersection is clear, the driver does not need to stop.
3. Drive quickly through the intersection to get out of the way of other vehicles.
Come to a full stop and yield the right-of-way before entering the intersection.
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!