2026 Arizona DMV Motorcycle Permit Test 7 (30 Questions And Complete Answers)
1 / 30
Terms in this set
30
The front brake supplies how much of a motorcycle's stopping power?
1. About one-quarter
2. About one-half
3. About three-quarters
4. All the stopping power
1. About one-quarter
2. About one-half
3. About three-quarters
4. All the stopping power
About three-quarters
It is most important to flash your brake light when:
1. Passing another vehicle.
2. You will be slowing down suddenly.
3. There is a stop sign ahead.
4. Your signals do not work.
1. Passing another vehicle.
2. You will be slowing down suddenly.
3. There is a stop sign ahead.
4. Your signals do not work.
You will be slowing down suddenly.
When riding in a group, inexperienced riders should position themselves:
1. Just behind the leader.
2. In front of the group.
3. At the rear of the group.
4. Beside the leader.
1. Just behind the leader.
2. In front of the group.
3. At the rear of the group.
4. Beside the leader.
Just behind the leader.
During the day, your headlight should:
1. Not be used.
2. Be used on its high beam setting.
3. Be used on its low beam setting.
4. Alternate between high beam and low beam settings.
1. Not be used.
2. Be used on its high beam setting.
3. Be used on its low beam setting.
4. Alternate between high beam and low beam settings.
Be used on its high beam setting.
To get the best protection, be sure that your helmet:
1. Meets Department of Transportation guidelines.
2. Looks sturdy.
3. Is inexpensive.
4. Is in your favorite color.
1. Meets Department of Transportation guidelines.
2. Looks sturdy.
3. Is inexpensive.
4. Is in your favorite color.
Meets Department of Transportation guidelines.
When riding in a group, motorcyclists:
1. Do not need space cushions.
2. Should increase their space cushions.
3. Should maintain adequate space cushions.
4. Should reduce their usual space cushions by half.
1. Do not need space cushions.
2. Should increase their space cushions.
3. Should maintain adequate space cushions.
4. Should reduce their usual space cushions by half.
Should maintain adequate space cushions.
Where should a load be placed?
1. As low as possible
2. As high as possible
3. Behind the rear axle
4. On one side of the motorcycle
1. As low as possible
2. As high as possible
3. Behind the rear axle
4. On one side of the motorcycle
As low as possible
When preparing to pass a vehicle on the left, it is important to ride on the left side of your lane because:
1. The right side could be slippery.
2. It will give you the best chance of spotting hazards in the next lane.
3. People don’t usually expect to be passed on their left.
4. It will place you in the rearview mirror of the car in front of you.
1. The right side could be slippery.
2. It will give you the best chance of spotting hazards in the next lane.
3. People don’t usually expect to be passed on their left.
4. It will place you in the rearview mirror of the car in front of you.
It will give you the best chance of spotting hazards in the next lane.
Maximum front-line braking is accomplished by:
1. Using the rear brake only.
2. Using the front brake only.
3. Using both brakes.
4. Using the rear brake while downshifting.
1. Using the rear brake only.
2. Using the front brake only.
3. Using both brakes.
4. Using the rear brake while downshifting.
Using both brakes.
To reduce your reaction time, you should:
1. Ride under the speed limit.
2. Cover the clutch and brakes.
3. Shift into neutral when slowing.
4. Accelerate before turning.
1. Ride under the speed limit.
2. Cover the clutch and brakes.
3. Shift into neutral when slowing.
4. Accelerate before turning.
Cover the clutch and brakes.
Showing the first 10 terms. Use the flashcard player above to study all 30 terms!