2026 Alabama DMV Permit Test 12 (26 Questions And Complete Answers)
1 / 26
Terms in this set
26
When should you yield your legal right-of-way?
1. Often, even at controlled intersections.
2. Whenever it helps prevent collisions.
3. Never. It confuses other drivers.
1. Often, even at controlled intersections.
2. Whenever it helps prevent collisions.
3. Never. It confuses other drivers.
Whenever it helps prevent collisions.
If you can see that the roadway up ahead is covered by heavy smoke, you should:
1. Turn on your four-way flashers and continue.
2. Reduce your speed, move as far to the right as possible, and stop off the roadway.
3. Turn on your high beam headlights and continue.
1. Turn on your four-way flashers and continue.
2. Reduce your speed, move as far to the right as possible, and stop off the roadway.
3. Turn on your high beam headlights and continue.
Reduce your speed, move as far to the right as possible, and stop off the roadway.
If you come to a railroad crossing with lowered gates and flashing warning lights, you should:
1. Drive around the crossing gates if you can't see a train.
2. Come to a complete stop well behind the gates, wait for the tracks to clear, and proceed once the gates are lifted.
3. Slow down and drive around the gates.
1. Drive around the crossing gates if you can't see a train.
2. Come to a complete stop well behind the gates, wait for the tracks to clear, and proceed once the gates are lifted.
3. Slow down and drive around the gates.
Come to a complete stop well behind the gates, wait for the tracks to clear, and proceed once the gates are lifted.
Large trucks are likely to lose speed when:
1. Driving up long or steep hills.
2. Driving in long, gradual curves.
3. Driving down long, gradual hills.
1. Driving up long or steep hills.
2. Driving in long, gradual curves.
3. Driving down long, gradual hills.
Driving up long or steep hills.
When you see an emergency vehicle approaching while using its flashing lights, you must:
1. Maintain your speed and stay in your lane until the vehicle has passed.
2. Move into the right lane and drive slowly until the vehicle has passed.
3. Pull over to the curb or edge of the road and stop until the vehicle has passed.
1. Maintain your speed and stay in your lane until the vehicle has passed.
2. Move into the right lane and drive slowly until the vehicle has passed.
3. Pull over to the curb or edge of the road and stop until the vehicle has passed.
Pull over to the curb or edge of the road and stop until the vehicle has passed.
You may pass a vehicle when:
1. You are on a hill or curve.
2. You are on a road with a solid line next to your lane.
3. You are on a road with a broken line next to your lane.
1. You are on a hill or curve.
2. You are on a road with a solid line next to your lane.
3. You are on a road with a broken line next to your lane.
You are on a road with a broken line next to your lane.
In traffic moving at 50 to 55 mph, you are least likely to have an accident if you:
1. Drive a few miles per hour faster than most other vehicles.
2. Stay within that speed range.
3. Drive a few miles per hour slower than most other vehicles.
1. Drive a few miles per hour faster than most other vehicles.
2. Stay within that speed range.
3. Drive a few miles per hour slower than most other vehicles.
Stay within that speed range.
If you are about to be hit from the rear, you should not:
1. Release your seat belt.
2. Brace yourself.
3. Press your head against the head restraint.
1. Release your seat belt.
2. Brace yourself.
3. Press your head against the head restraint.
Release your seat belt.
The proper way to make a right turn is to:
1. Signal, slow down, and get into the lane closest to the centerline before turning.
2. Signal, slow down, and get into the lane closest to the right curb before turning.
3. Approach the corner in the lane nearest the right curb, but move over toward the middle of the street before turning.
1. Signal, slow down, and get into the lane closest to the centerline before turning.
2. Signal, slow down, and get into the lane closest to the right curb before turning.
3. Approach the corner in the lane nearest the right curb, but move over toward the middle of the street before turning.
Signal, slow down, and get into the lane closest to the right curb before turning.
When double solid yellow lines separate lanes of traffic:
1. Passing is permitted from the left.
2. Passing is permitted from the right.
3. Passing is not permitted from either direction.
1. Passing is permitted from the left.
2. Passing is permitted from the right.
3. Passing is not permitted from either direction.
Passing is not permitted from either direction.
Showing the first 10 terms. Use the flashcard player above to study all 26 terms!